Notes · Astrophotography
Star trackers and polar alignment under southern skies
Anyone photographing the night sky on a fixed tripod soon hits the same wall: exposures longer than a few seconds turn stars into short trails. The fix is a mount that turns with the sky. In the southern hemisphere, lining that mount up is a little harder than in the north.
Why stars trail
The Earth turns once a day, so the sky appears to rotate around the celestial poles. From New Zealand the south celestial pole sits above the southern horizon at an altitude equal to your latitude: about 37 degrees from Tāmaki Makaurau, 41 from Pōneke and 46 from Ōtepoti. Everything in the sky wheels around that point.
On a fixed tripod, a common rule of thumb is to divide 500 by your lens's full-frame-equivalent focal length to get a rough maximum exposure in seconds before trailing becomes obvious. With a 14 mm lens on a full-frame camera that is around 35 seconds; with a 50 mm lens it drops to 10. Many people now use a stricter version for high-resolution sensors. Either way, longer lenses and longer exposures need tracking.
Types of tracking mount
Star trackers
A star tracker is a compact motorised head that sits between a sturdy photo tripod and a camera. It turns a single axis at the sidereal rate, so once the axis points at the celestial pole, the camera follows the sky. Trackers are light, run on batteries, and fit in a daypack, which makes them ideal for taking to a dark site. With a wide or standard lens they allow exposures of minutes rather than seconds.
Their limit is payload. A camera and a 135 mm lens are usually fine; a small telescope may be pushing it.
Equatorial mounts
A German equatorial mount does the same job with two axes, a counterweight and much more capacity. It can carry a small refractor and camera for deep-sky imaging, and most modern ones have a computerised hand controller or app. They are heavier and take longer to set up, but they are the standard tool for serious astrophotography.
Alt-azimuth mounts
Many computerised telescopes, including most go-to Dobsonians and fork-mounted Schmidt-Cassegrains, are alt-azimuth: they move up-down and left-right. They track objects well enough for visual use, but the field slowly rotates during a long exposure. That is fine for short planetary video and live stacking of brief frames, and less suitable for long-exposure deep-sky work unless you add an equatorial wedge or a field derotator.
Polar alignment without a pole star
Northern hemisphere photographers have Polaris, a bright star less than a degree from their pole. We do not. The nearest naked-eye star to the south celestial pole is Sigma Octantis, at about magnitude 5.5 and roughly a degree from the pole, which is hard to see from a suburban backyard and invisible through most polar scopes in light-polluted skies. Our guide to the Southern Cross and finding south covers how to locate the general area; here are the ways to get precise.
The Octans trapezoid
Many polar scopes have a southern reticle showing a small trapezoid of four faint stars in Octans, with Sigma Octantis at one corner. You match the pattern in the polar scope to the reticle, rotating the mount until all four stars sit in their circles. It works well under dark skies once you have done it a few times. Under city skies the stars can be too faint to see, so practise on a dark night first.
Using the Pointers and Crux
For short exposures with a wide lens, a rough alignment can be good enough. Extend the long axis of the Southern Cross and the perpendicular bisector of the Pointers (Alpha and Beta Centauri), and where they meet is close to the pole. Aim the tracker's axis there, set the altitude to your latitude, and test. If stars trail, adjust and try again.
Plate-solving
The most reliable modern method uses software. The camera or a small guide camera takes images, software identifies the star field from the pattern of stars, works out exactly where the mount's axis is pointing, and tells you how far to turn the altitude and azimuth knobs. Several dedicated polar-alignment devices and laptop programs work this way, and some mounts have it built into their apps. Because it uses whatever stars are visible, it works even when Sigma Octantis does not.
Practical tips for NZ conditions
- Level the tripod first. It makes adjustments independent and saves a lot of frustration.
- Use a compass carefully. Magnetic declination across New Zealand is large, roughly 19 to 25 degrees east of true north depending on where you are. A compass pointed "south" will be well off true south unless you correct for it.
- Check the wind. A tracker on a light tripod shakes in a breeze. Hang a bag from the tripod hook and shelter it behind a car or wall.
- Plan the target. Stellarium shows where the Milky Way core, the Magellanic Clouds or a particular nebula will be at any time from your location, and In-The-Sky.org is handy for Moon phase and rise times.
- Watch the dew. Long exposures mean long nights, and a fogged lens ruins a session. A small dew heater strip around the lens barrel is cheap insurance.
Where to begin
Start with a wide lens on a tracker and a rough alignment, and see how long you can expose before stars stretch. Then tighten the alignment and lengthen the lens. If you have already been shooting the aurora on a fixed tripod, as described in our post on aurora photography with a phone or camera, a tracker is the natural next step: the same camera and lens, but suddenly the faint nebulae of Carina and the Magellanic Clouds are within reach.